Resource Library: Multimedia/Resource Library: Multimedia.iso/archvrs/msdos/shez80/shez.hlp

Text File | 1992-08-18 | 26.6 KB | 807 lines

*#  !Display serial number
 Use this option to display your
 installed serial number.

*file !!!MAIN FILE WINDOW OPTIONS!!!
 --------MISC COMMANDS--------------
 ESC.......= Go back 1 directory or
             exit if at the root.
 F1........= HELP
 ALT-Q.....= Immediately exit SHEZ
 CTL-X.....= Exit SHEZ into extract dir.
 CTL-ENTER.= Activate Alternate File Viewer
 F6........= Toggle between $.$ and *.*
 F7........= Create new compressed file
 ALT-B.....= Browse any file
 ALT-C.....= Add/update compressed file comments
 ALT-P.....= Enter drive:path to extract into
 ALT-W.....= Write SHEZ.CFG file.
 ALT-1.....= Toggle authenticity mode (PKZIP)
 ALT-4.....= Toggle Volume label processing
 /.........= Display menu bar
 #.........= Display Serial Number
 Enter.....= Display directory contents, or
             Display file contents.
 F10.......= Temporary Exit to DOS
 ALT-F10...= Temporary Exit to DOS into
             extract Directory
 F2........= Switch to another directory
 TAB.......= Open\Close second directory
             window
 ----HIGHLIGHTED FILE COMMANDS------
 CTL-F2....= Copy highlighted file
 F3........= View highlighted file
 CTL-F3....= Move highlighted file
 F4........= Del  highlighted file/dir
 Del.......= Del  highlighted/tagged
             file(s) or dirs.
 F5........= Show highlighted file stats
 CTL-F6....= Ren  highlighted file
 F8........= Make Self Extracting file
             from highlighted file
 ALT-V.....= Convert highlighted archive
             file to another format.
 +.........= Tag highlighted file
 -.........= Untag highlighed file
 ALT-F.....= Run PKZIPFIX against file
 ----TAGGED FILE COMMANDS-----------
 SFT-F2....= Copy tagged files
 SFT-F3....= Move tagged files
 SFT-F4....= Delete all tagged files
 SFT-F6....= Rename tagged files
 SFT-F8....= Make Self Extracting files
             from all tagged files.
 CTL-V.....= Convert all tagged archive
             files to another format.
 CTL-U.....= Untag all tagged files
 ALT-Z.....= Check .COM, .EXE, .OVL files in
             all tagged compressed files for
             viruses.
 CTL-Z.....= Same as ALT-Z but strip comments
             out of .ZIP files.
 CTL-SPACE.= Tag all files
 CTL-T.....= Tag all files
 -----FILE LIST COMMANDS------------
 F9........= Sort the file display
 ALT-R.....= Reread the directory.
 SPACE.....= Toggle tag status
 ALT-D.....= View 4DOS/NDOS desc.
 TAB.......= Open/Close second file
             window.
 -----MACRO COMMANDS----------------
 ALT-5.....= Pause macro for input
 ALT-6.....= Start/Stop recording
 ALT-7.....= Playback recorded keys
 ALT-8.....= Load macro file
 ALT-9.....= savE macro file
 ALT-0.....= Flush key record buffer

*main !!!MAIN HELP PANEL!!!
 -KEYS ACTIVE DURING compressed FILE DISPLAY-
 ESC   = Cancel operation
 ALT-A = Add a list of files
 A     = Add file(s) to compressed
 ALT-C = Add/update file comments
 S     = Add\Update file comment records
         for highlighted file
 SFT-S = Add\Update file comment records
         for all files in compressed file.
 ALT-Z = Check .COM,.EXE,.OVL for viruses
 CTL-V = Convert sfx file.
 CTL-Y = Copy tagged files from one compress
         file to another.
 F7    = Create new compressed file
 ALT-D = Delete all extracted files
 D     = Delete highlighted file
 Del   = Delete highlighted/tagged files(s)
 CTL-D = Delete tagged files
 #     = Display Serial Number
 F8    = EDIT SELECTED FILE
 ALT-P = Enter drive:path to extract into
 CTL-X = Exit SHEZ into extract dir.
 ALT-X = Extract all files
 CTL-E = Extract all tagged files
 ALT-N = Extract all/tagged NEWER files
 ALT-E = Extract specified file(s)
 E     = Extract the highlighted file
 ALT-F = Freshen a list of files
 F     = Freshen file(s) in compressed
 F1    = HELP
 ALT-Q = Immediately exit SHEZ
 /     = Menu display
 ALT-M = Move a list of files
 M     = Move file(s) to compressed file
 TAB   = Open\Close second directory
         window
 G     = Password for compressed file
 R     = Run the highlighted file
 ALT-G = Search files for a STRING
 Z     = SPECIFY compressed FILE MASK
 I     = Show info about archive file
 F9    = Sort archive listing
 P     = Specify Path options
 ALT-S = Speed search
 F2    = Switch to another archive file
         or directory
 +     = Tag highlighted file
 F10   = Temporary exit to DOS
 ALT-F10 Temporary exit to DOS
         into extract DIR
 T     = Test archive integrity
 ALT-1 = Toggle authenticity mode (PKZIP)
 O     = Toggle overwrite for extract
 SPACE = Toggle tag status
 ALT-T = Toggle tagged file display line
 ALT-4 = Toggle volume label processing
 CTL-U = Untag all files
 -     = Untag highlighed file
 ALT-U = Update a list of files
 CLT-T = Update archive file time&date
 U     = Update file in archive
 ALT-V = View file comment records
 ALT-Y = Run PGM against tagged file(s)
 V|RET = View the file
 CTL-ENTER = Ativate Alternate File Viewer
 CTL-SPACE = Tag all files
 ALT-5  Pause macro for input.
 ALT-6  Start/Stop recording.
 ALT-7  Immediately play recorded keys.
 ALT-8  Load and run a recorded key macro.
 ALT-9  Save recorded keys
 ALT-0  Turn off Recording and flush record buffer.

*pmenu1 !!Directory pull down!!
 Use the left and right cursor keys to
 highlite a menu item.  Then press the
 enter key to display the options for
 the highlighted item.  After the
 option menu appears you may press the
 F1 (help) key to obtain further help.

*pmenu2 !!Directory pull down!!
 Use the left and right cursor keys to
 highlite a menu item.  Then press the
 enter key to display the options for
 the highlighted item.  After the
 option menu appears you may press the
 F1 (help) key to obtain further help.

*space !!toggle tag status!!
 Pressing the space bar will tag the
 highlighted file if it is not tagged,
 or will untag the file if is it tagged.

*+    !!tag file!!
 The plus key will tag the currently
 highlighted file and will move the
 highlight bar down one line.

*-    !!untag file!!
 The minus key to untag the currently
 highlighted file and will move the
 highlight bar down one line.

*a    !!add!!
 Using this option you can specify the
 file(s) you wish to ADD to the
 compressed file. You may enter multiple
 filespecs in the entry window.  Wild
 cards are allowed for filenames and
 extensions.

*alta  !!add-from-list!!
 This option allows you to ADD files into
 the compressed by displaying a list of
 files in a window.  After the window is
 displayed you tag the files to ADD by
 pressing the space bar.  After all files
 have been tagged press the ENTER key to
 process the tagged files.

*altc  !!add/update comments!!
 This option will allow you to add or
 update the compressed file comments.

*altd  !!delete all extracted!!
 This option will delete all files that
 are contained in the compressed file
 from the current DISK:\DIRECTORY,or the
 one specified via the ALT-P command.

*alte  !!extract list!!
 This option allow you to specify which
 files to extract from the compressed
 file. You may specify more the one
 filespec when the prompt appears.  Wild
 cards are allowed.

*altf    !!freshen-from-list!!
 This option allows you to FRESHEN files
 in the compressed by displaying a list
 of files in a window.  After the window
 is displayed you tag the files to
 FRESHEN by pressing the space bar.
 After all files have been tagged press
 the ENTER key to process the tagged
 files.

*altg   !!search for string!!
 This option allows you to search all ,or
 only tagged files, for a specific string of
 characters using the program FGREP.COM
 (Which must be in a directory in your PATH
 statement). If no files are tagged then all
 files will be searched.  After the search is
 completed to results will be listed on the
 screen.

*altm   !!move-from-list!!
 This option allows you to MOVE files
 into the compressed by displaying a list
 of files in a window.  After the window
 is displayed you tag the files to MOVE
 by pressing the space bar.  After all
 files have been tagged press the ENTER
 key to process the tagged files.

*altn  !!extract newer!!
 This option will extract ALL or TAGGED NEWER
 files from the compressed file into the
 current DISK:\DIRECTORY or the one specified
 via the ALT-P command.

*altp  !!!get_extract_path!!!
 This options allows you to specify a disk
 and directory of where any extracted files
 will be placed.  Specify the extract path as
 follows:
 DISK:\DIRECTORY
 Pressing any key other than the ENTER key
 will clear the extract path. To display a
 directory window enter ONLY a DRIVE LETTER
 FOLLOWED BY A COLON, then press the enter
 key.
 A single * may be entered to tell SHEZ to
 use it's floating extract location
 logic.

*alts   !!speed_srch!!
 Speed search allows you to find a file
 in the compressed file quickly.  After
 the window pops up enter the first
 character of the file you wish to find.
 The display will be repositioned to the
 first file in the list that starts with
 that letter. (NOTE since files are
 stored in random order sort the list
 first)

*altt  !!toggle tagged display line!!
 Pressing the ALT-T keys will toggle
 the tagged file display line at the
 bottom of the screen.

*altu    !!update-from-list!!
 This option allows you to UPDATE files
 in the compressed by displaying a list
 of files in a window.  After the window
 is displayed you tag the files to
 UPDATE by pressing the space bar.
 After all files have been tagged press
 the ENTER key to process the tagged
 files.

*altv  !!view archive comments!!
 This option will display the master
 comment record and the file comment
 records for the selected compressed
 file.

*altx  !!extract all!!
 This option will extract ALL files from
 the compressed file into the current
 DISK:\DIRECTORY or the one specified via
 the ALT-P command.

*alty   !!run pgm on tagged!!
 This option allows run a program against
 all tagged file(s).  You will be prompted
 to enter the program name to run, the
 parameters to pass to the program, if you
 want SHEZ to swap itself out of memory when
 running the program, and if you want SHEZ
 to pause after each execution of your
 program.

*altz  !!virus check!!
 This option will check files to see if they
 have been infected with a virus.  You must
 have the virus checking program from McAfee
 Assoc. call SCAN.EXE version 39 or greater,
 and have used the configuration program to
 tell SHEZ where to find SCAN.EXE.
 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 IF FILES ARE TAGGED SHEZ WILL ONLY CHECK
 THE TAGGED FILES FOR INFECTION.

*alt1  !!authenticity toggle!!
 This option will toggle the authenticity
 option when using PKZIP version 1.1 or
 greater.  If the authenticity mode is
 toggled on a ! will appear next to the
 [FILE LIST] window header on the main
 screen or next to the NAME field on the
 compressed file contents screen.

*c  !!create-new!!
 This will allow you to create a NEW
 compressed file.  You will be prompted
 to enter the
 DISK:\DIRECTORY\FILENAME.EXT of the
 compressed file to create, whether you
 want to add or move files into the new
 compressed file, and the DISK:\DIRECTORY
 of the files to add and/or move to the
 new compressed file.
 YOU MUST SUPPLY A FILE EXTENSION FOR THE
 FILE TO BE CREATED.  SHEZ CURRENTLY WILL
 ALLOW YOU TO CREATE ZIP,ARC,ZOO,LZH and
 PAK files!!!!!

 You will also be asked if you want to
 TAG files to be added/moved or process
 the entered file spec as is.

 If the compression program you choose
 supports saving path information you will
 also be asked if you want to save
 directory information, and if you want to
 recurse the directory tree.

 If you are converting from a ZIP to an ARJ
 or a ARJ to a ZIP file you will also be
 asked if you wish to preserve volume label
 information that can be stored inside the
 compressed file.  (THIS OPTION WILL ONLY
 APPEAR WHEN CONVERTING THE CURRENTLY
 HIGHLIGHTED FILE.  IT WILL NOT APPEAR IF
 RUNNING UNDER OS/2.)


*ctld  !!delete tagged!!
 This option will delete all tagged files
 from the compressed file.  You will be
 asked to verify the delete before the
 files are actually deleted from the
 compressed file.

*ctle  !!extract tagged!!
 This option will extract all tagged
 files from the compressed file.

*ctlenter  !!alternate viewer!!
 This option will activate the alternate
 file viewer if one has been set via the
 SHEZEV environment variable.  PLEASE SEE
 THE USER MANUAL FOR INSTRUCTIONS ON
 SETTING UP AN ALTERNATE VIEWER.

*ctlt  !!update compressed time and date!!
 This option will set the compressed
 file's time and date to the time and
 date corresponding to the newest file in
 the compressed file.

*ctlu  !!untag all!!
 This option will untag all currently
 tagged files.

*ctlsp  !!tag all files!!
 This option will tag all files in the
 currently displayed window.

*ctlv  !!convert sfx files!!
 This option will convert a self
 extracting file back to its native
 compressed file format. The self
 extracting file will remain untouched.
 The normal compressed file will be
 built on the same drive and directory
 where self extracting file is found.

*ctly  !!copy members to another arc!!
 This option allows you to copy all
 tagged files from the current compressed
 file into another compressed file.  The
 target compressed file may be any
 currently supported format.

*ctlx !!exit to extract dir!!
 This option will exit SHEZ and will
 drop you off into disk and directory
 that is specified as the extract
 location.

*d  !!delete one file!!
 This option will delete the currently
 highlighted file from the compressed
 file. You will be asked to verify the
 delete before the delete is actually
 done.

*e  !!extract one file!!
 This option will extract the currently
 highlighted file onto the default disk
 drive and directory, or the
 DISK:\DIRECTORY that was specified via
 the ALT-P command.

*f      !!freshen!!
 Using this option you can specify the
 file(s) you wish to FRESHEN in the
 compressed file. You may enter multiple
 filespecs in the entry window.  Wild
 cards are allowed for filenames and file
 extensions.

*f10  !!to-dos!!
 This option will temporarily exit to
 DOS. You may then execute any DOS
 command.  To return to SHEZ
 enter EXIT at the DOS prompt and press
 the return key.

*af10  !!to-dos to extract_path!!
 This option will temporarily exit to
 DOS and will drop you into the extract
 directory. You may then execute any DOS
 command.  To return to SHEZ enter EXIT
 at the DOS prompt and press the return key.

*f2    !!switch_arc!!!
 This option prompts for a new DRIVE:\PATH to
 change to.  You may also specify a filename
 and file extension if you wish. Wild cards
 in the name and extension are allowed. IF
 YOU ENTER A FILENAME OF $ AND A FILE
 EXTENSION OF $ SHEZ WILL DISPLAY ONLY THE
 ARCHIVE FILES THAT ARE FOUND IN THE
 SPECIFIED DIRECTORY.
 I.E. C:\WORK\$.$
 You can also pop-up a directory tree window
 by press the F9 key. When the tree appears
 you may press the letters C-Z to obtain a
 directory tree of a different drive. You may
 also enter a DRIVE LETTER FOLLOWED BY A
 COLON, before pressing the the F9 key.

*f8  !!edit!!
 This option will allow you to edit a
 file in the compressed file.  This
 option will only work if you specified
 an editor to use when you configured
 compressedPER.

*f9    !!!get_sort!!!
 Using this option you can specify how
 you want the compressed files sorted on
 the screen. They can be sorted by Name,
 Extension, Date, Size, or Unsorted.

*fact  !!!compression factor!!!
 This option will allow you to set the
 compression method used by the PKZIP or ARJ
 programs.  When you set the compression
 method, it will remain in effect until you
 change it again.


*g  !!password!!
 This option allows you to specify the password
 to be used by the compression program.  If the
 compression program does not support passwords
 an error window will appear informing you that
 the option is not supported.

*i  !!show info!!
 This option will show information about
 the compressed file. I.E. Number of
 files in file, total size of all files,
 time and date of compressed file, etc.

*m     !!mode!!
 Using this option you can specify the
 file(s) you wish to MOVE into to the
 compressed file. You may enter multiple
 filespecs in the entry window.  Wild
 cards are allowed for filenames and
 extensions.

*o !!toggle overwrite!!
 This option toggles overwrite mode. When
 overwrite mode is active the letter "O"
 will appear in the upper right corner of
 the compressed display heading line.
 When overwrite is active the uncompress
 pgm will not ask you if you wish to
 overwrite a pre-existing file when you
 extract a file from the compressed file.

*p  !!path options!!
 This option allows you to specify if you
 want to save and/or use path information
 when working with compressed files.

*q  !!immediate exit!!
 This option will immediately exit
 SHEZ.

*r  !!run a file!!
 This option will extract and run the
 highlighted EXE or COM file.  You will be
 prompted to enter the optional command line
 parameters that the program may need.  When
 the program ends the extracted file will be
 deleted.

*s  !!add/update file comments!!
 This option allows you to add and or
 update the comment records associated
 with the currently highlighted file.

*sfts  !!add/update file comments!!
 This option allows you to add and or
 update the comment records assocaited
 with each file in the compressed file.

*t  !!test compressed!!
 This option will test the integrity of
 the compressed file.

*u       !!update!!
 Using this option you can specify the
 file(s) you wish to UPDATE in the
 compressed file. You may enter multiple
 filespecs in the entry window.  Wild
 cards are allowed for filenames and file
 extensions.

*v  !!view!!
 This option will allow you to view the
 contents of a file in the compressed
 file.  The LIST.COM program will be used
 to view the file.

*z  !!mask!!
 This option allows you to specify a file
 mask to be used when displaying the
 contents of a compressed file.  For
 example if you specify a mask of *.C
 only the files having an extension of C
 will be displayed on the screen.

*maltd !!view 4dos!!
 This option will display the 4DOS or
 NDOS file descriptions that are
 maintained by the DESCRIBE command.
 SHEZ can only handle a description
 file that is 30,000 bytes or less.

*mtab !!open second file window!!
 When the DOS directory window is
 displayed, pressing the TAB key will
 open a secondary directory display
 window.  You may view other directories
 and/or drives while this window is
 open.  Pressing the TAB key again is
 the only way to close the secondary
 display window.

*malte !!edit highlighted file!!
 This option will invoke the editor that
 you specified when you configured SHEZ.
 The highlighted file will be passed to
 the editor.

*mcf4 !!delete tagged files!!
 This option will delete all files that
 have been tagged in the file window.
 After all the files are deleted the file
 window will be refreshed.

*mf3  !!view file!!
 This option allows you to view the
 highlighted file.

*mf4  !!delete file/dir!!
 This option allows you to delete the
 highlighted file/dir.  You will be
 prompted to verify the delete.

*mf5  !!file stats!!
 This option will display the highlighted
 file's time,date,and size.

*mf6  !!toggle $.$ *.*!!
 This option will toggle the DOS files to
 display between the $.$ specification
 and the *.* specification.

*mf9  !!file sort!!
 This option will sort the file list by
 File name, File extension, or File date,
 File size, or unsorted, depending on how
 you reply to the sort prompt. Enter a N,
 E, D, S or U.

*mf8  !!make sfx files!!
 F8 will make a self extracting file from
 the highlighted file.
 SHIFT-F8 will make self extracting files
 from all tagged files.
 (ONLY ZIP,LZH,PAK, and SDN files are
 currently supported)

*altb  !!browse a file!!
 This option allows you to enter the name
 of a file you wish to view.  The
 user specified Browse program, that was
 set during configuration, will be
 use to Browse the specified file.

*malt-c  !!add/update file comments!!
 This option allows you to add and or update
 file comment records in all tagged
 compressed files. You will be prompted for a
 data file that contains the comment
 record(s) you wish to add.

*maltf  !!run pkzipfix!!
 This option will run the PKZIPFIX program
 against the currently highlighted file.
 The PKFIXED.ZIP file will be placed in the
 same directory as the ZIP file you are
 fixing.  The PKZIPFIX.EXE program must be
 located in a directory in your DOS path.

*malt-v  !!convert one file!!
 This option will convert the highlighted
 archive file from one format archive to
 another format archive. You will be
 asked if you want to delete the original
 archive file after the conversion is
 complete.

*mctl-v  !!convert tagged!!
 This option will convert all tagged
 archive file(s) from one format archive
 to another format archive. You will be
 asked if you want to delete the original
 archive file(s) after the conversion is
 complete.

*malt-r  !!reread directory!!
 This option will reread the current
 directory and refresh the displayed file
 list.

*malt-w  !!write cfg file!!
 This option will write the current SHEZ
 configuration options out to a file
 named SHEZ.CFG.  The file will be written
 to the current disk:\directory.  This file
 will be used by the SHEZCFG program to set
 the default SHEZ program options when you
 configure SHEZ.

*malt-z  !!virus check!!
 This option will check ALL .COM ,.EXE, .OVL
 files in all tagged compressed files,
 to see if they have been infected with
 a virus.  You must have the virus checking
 program from McAfee Assoc. call SCAN.EXE
 version 39 or greater, and have used the
 configuration program to tell SHEZ where
 to find SCAN.EXE.
 THE CTL-Z WILL DO SAME AS ABOVE PLUS IT
 WILL STRIP THE COMMENT RECORDS OUT OF
 THE SCANNED .ZIP FILES.


*mctl-f2  !!copy file!!
 This option allows you to copy the
 highlighted file. You will be prompted
 to enter file destination information.
 You must at least enter a filename and
 extension in the TO: field.

*mctl-f3  !!move file!!
 This option allows you to move the
 highlighted file. You will be prompted
 to enter file destination information.
 The highlighted file will be copied to
 the entered destination and then deleted
 from the current location.

*mctl-f6  !!rename file!!
 This option allows you to rename the
 highlighted file. You will be prompted
 to enter new filename information.
 You must at least enter a filename and
 extension in the TO: field.

*msfx !!copy,move,delete,rename tagged files!!
 This option will copy,move,delete, or
 rename all files that have been tagged in
 the file window. After all the files are
 operated on, the file window will be
 refreshed.

*print !!help for print!!
 This option will print the currently
 highlighted file.  If you are working
 with an ARC,ZOO,LZH or PAK file output
 will always go to the DOS PRN device.

*nomatch  !!no matching file found!!
 No matching files where found in the directory that is displayed
 in the information window.  Pressing ESC will exit SHEZ, pressing
 F2 will allow you to create a compressed file, and pressing
 F3 allows you to specify a new DISK:\DIRECTORY to look at.

*macs  !!Macro help file!!
 All keyboard macro functions must be initiated from
 the keyboard.  Hot KEYS are as follows:

 ALT-5  Pause the macro to accept input.
 ALT-6  Start/Stop recording.
        (When recording speaker will sound as each
         key is pressed)
 ALT-7  Immediately play recorded keys.
 ALT-8  Load and run a recorded key macro.
 ALT-9  Save recorded keys
 ALT-0  Turn off Recording and flush record buffer.

*scan  !!set scan to all or exe!!
 Using this option you may over-ride the scanning
 option that was set at configuation time.
 Selecting ALL will scan all files contained in
 compressed files for infection.
 Selection EXECUTABLES will scan all .EXE, .COM
 and .OV? files for infection.

*vol  !!Toggle volume label processing!!
 This option will toggle the volume label
 processing in SHEZ. If active a $ will
 appear next to the word NAME on the file
 heading line, or in the upper left corner
 of the DOS directory display box.
 Volume label processing is only supported
 when processing ZIP and ARJ files.

*avol !!add volume label!!
 This option will add a volume label to the
 current .ZIP or .ARJ file. You will be
 prompted for a drive letter to obtain the
 volume label from.

*tab  !!open\close second dir window!!
 Pressing the TAB key will open or close
 a secondary DOS directory file window.
 Within this window most file minipulations
 can be performed.

*del  !!delete highlighted/tagged file(s)
 Pressing the DEL KEY, will delete the
 hilighted file, if no files are tagged, OR
 will delete all tagged files.

*end
INDEXX# !Disp"file!!!J2ümain!!!J5√
pmenu1!(τpmenu2!(⌠space!!*■+   !!t&î-   !!u'a   !!a*èalta !!    +taltc !!'¡altd !!*alte !!*┌altf
*░altg  !
/∩altm  !    +Paltn !!/à altp !!/G!alts  !*#altt !!&ï$altu
*%altv !!&P&altx !!+Σ&alty  !
.û'altz !!.Φ(alt1 !!    +î*c !!cre#-╝+ctld !!+(0ctle !!&·0ctlenter+e1ctlt !!+Z2ctlu !!'
3ctlsp !(U3ctlv !!    )╗3ctly !!+∞4ctlx!!e'╔5d !!del(`6e !!ext)"7f     !+τ7f10 !!t)╥8af10 !!.¢9f2   !!/å:f8 !!ed)∙<f9   !!*┐=fact !!.ä>g !!pas1Z?i !!sho*R@m    !!*Ao!!togg
+≈Ap !!pat+ZCq !!imm$≡Cr !!run.2Ds !!add(>Esfts !!)█Et !!tes)nFu      +┼Fv !!vie+½Gz !!mas+JHmaltd!!'MImtab!!o
*+Jmalte!!*lKmcf4!!d+Lmf3 !!v%╞Lmf4 !!d'Mmf5 !!f+íMmf6 !!t+Nmf9 !!f+îNmf8 !!m+bOaltb !!+CPmalt-c /,Qmaltf !-Rmalt-v +1Smctl-v +)Tmalt-r +$Umalt-w     -£Umalt-z .╠Vmctl-f2)ûXmctl-f3+oYmctl-f6)tZmsfx!!c,b[print!!)2\nomatchD·\macs !!6^scan !!3▐_vol !!T    ,aavol!!a-Kbtab !!o-cdel !!d-═cXYZ